EOR Experimental Study by Gas Injection in Strong Water Sensitive Reservoir 强水敏油藏注气提高采收率实验研究
Because of low viscosity and light weight of crude oil, gas injection is the effective tool for enhancing recovery efficiency in the low-permeability oil reservoir. 由于地层原油黏度低,油质较轻,注气开发是提高低渗透油藏采收率的有效手段;
Optimization of annular gas injection technology in coalbed methane aerated under-balanced drilling Analysis on Chemical Equilibrium in Pressurized Pulverized Coal Gasifier 煤层气欠平衡钻井环空注气工艺优化粉煤加压气流床气化炉内化学平衡分析
Using numerical simulation method, the retrograde condensation saturation variety and the development effect of the single well dry gas injection is studied. 应用数值模拟技术,研究地层中反凝析液饱和度的变化规律和注干气吞吐技术的开发效果。
Gas injection technology is used to improve oil recovery in Tuha oilfield, sensitivity evaluation has been conducted by means of numerical simulation orthogonal experiment method. 针对吐哈油田注气提高采收率,基于数值模拟手段,运用正交试验法对影响注气效果的因素进行了敏感性评价。
Comparing among different gas injection rates, it can calculate the optimum injection rate of gas well. 通过不同注气量对比,可计算出气井最佳注气量。
At the same time, more cross-hole information would be obtained, which will provide the solid foundation for gas injection displacement in Wenwu block. 通过应用获得了更多的井间信息,也为该项技术的扩展应用提供了借鉴。
Computation of three-dimensional flow field in secondary gas injection for thrust vectoring nozzle 气体二次喷射矢量喷管三维流场计算
The challenge and progress of gas injection EOR& Air injection LTO technology 注气提高采收率技术的挑战与发展&注空气低温氧化技术
Influence of gas injection way on oil displacement efficiency of Shan-shan low permeability reservoir in laboratory 室内注气方式对鄯善低渗油藏驱油的影响
Experimental Study of the Influence of Gas Injection on Light Oil Reservoir Formation Fluids Physical Properties 注气对轻油油藏流体物性影响的实验研究
Although it too is of some importance to the design of an acid gas injection scheme, it will not be discussed here. 在设计酸气注入方案时,这个问题也具有一定的重要性,但本文对此问题不进行讨论。
Risk and countermeasures of gas injection displacement technology in Suizhong 36-1 oil field 绥中36-1油田气驱替技术的风险与对策
The gas injection in volatile oil reservoirs can make a greater impact on the phase behavior of initial oil systems. 根据气液两相相平衡热力学模型研究了某挥发油油藏在注天然气过程中油藏体系相态特征的变化规律。
Influence of Gas Injection Parameters on the Effect of Unstable-state Displacement by Gas Flooding 注气参数对注气驱非稳态驱替效果的影响
A "U" Shape Pressurization Device Designed for the Pressurized Liquefied Petroleum Gas Injection Analysis on Gas Chromatography 一种用于液化石油气体气相色谱分析的U型增压进样装置
Analysis of Second Gas Injection Affecting Factor on SRM Thrust Vector Control 气体二次喷射SRM推力矢量控制影响因素分析
Effect of Inert Gas Injection on Transport Law of Combustible Gas in Closed Fire Zone 注惰对封闭火区可燃性气体运移规律影响的研究
Influence of Argon Gas injection on Fluid Flow in Slab Continuous Casting Mold 吹氩对板坯连铸结晶器流体流动的影响
This rule was significant for choosing the way of gas injection heat mining of coal-bed. 这一规律对煤层气热采方式的选择具有重要指导意义。
The tool is designed on the basis of multiphase flow in horizontal wells, and can provide multiphase flow profile, gas injection profile and the real-time three phase flow interpretation. 该仪器是依据水平井中多相流体的特点设计的,能很好地提供这类流体剖面,吸液吸气剖面和多相流体的实时解释成果。
Research on the Usability of Underground Salt Rock Gas Storage in the Process of Gas Injection and Production 注采气过程中地下盐岩储气库可用性研究
Development of EOR by gas injection in fractured reservoirs 裂缝性油藏注气提高采收率技术进展
Gas injection immiscible displacement has been selected to improve recovery efficiency in Wenwu block of Tuba oilfield. 温五区块是吐哈油田利用注气非混相驱提高采收率的试验区块。
The engineering design of desulfurizing and NDCT with flue gas injection, especially the tower design, in a domestic power plant is introduced. 详细介绍国内某电厂的脱硫-烟塔合一工程设计,特别是烟塔的设计。
Unsteady characteristic research of startup process of secondary hot gas injection thrust vector control system 燃气二次喷射推力矢量控制系统启动过程非定常效应研究
We can learn from above that the study of material balance method during gas injection flooding is very important. 因此,研究注气开采过程中的物质平衡方程式具有十分重要的意义。
Experimental study on feasibility of hydrocarbon gas injection in Gao 13 Block of Jidong Oilfield 冀东油田高13断块烃气驱可行性实验研究
The effects of nozzle structure, fuel gas injection velocity and excess air coefficient on NOx emission in high temperature air combustion were investigated. 通过两种结构烧嘴的热态燃烧试验对比,研究了烧嘴结构、燃气射流速度、过量空气系数对高温空气燃烧过程氮氧化物排放的影响特性。
Corresponding with different displacements of simulated diesel engine, the optimal quantity of non-thermal plasma gas injection exists, which will lead to the maximum conversion rate of NO. 对应于不同的柴油机排气量,低温等离子体气体喷射量存在一个最佳值,可使得NO转化为NO2的效率最高;